home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Group 42-Sells Out! - The Information Archive
/
Group 42 Sells Out (Group 42) (1996).iso
/
commun
/
cell
/
lopht
/
rshack03.txt
< prev
next >
Wrap
Text File
|
1996-02-07
|
2KB
|
51 lines
RADIO SHACK 17-1006/20/51/76/77 - CT102/302/1030/1033
NOTES: These are dual NAM units.
The ESN prefix is 165 decimal & A5 hex.
Radio Shack: 817-390-3244
NAM PROGRAMING:
1. Turn power on.
2. Enter * 3 0 0 1 # S S S S S SEL 9 END where SSSSS is the security code
1 2 3 4 5 is the factory default.
3. If the above was succesfull the phone will display "IdEnt IF InFO Pri"
Skip to step 6 to program NAM 1, or complete steps 4 & 5 to switch to NAM 2.
4. Press SND and the phone will display "OPt InFO diSAbLEd"
5. Press SND and the phone will display "OPt InFO EnAbLEd"
6. Press END, the first data entry will be displayed.
7. The SND key toggles single digit options.
7. The END to stores and increments each step.
8. Press SEL CLR to exit programing having entered all steps.
PROGRAMING DATA
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 00000 - 32767 HO-Id SYSTEM ID
02 0 OR 1 MIN Mark MIN MARK
03 0 OR 1 LOCL OPt LOCAL USE MARK
04 10 DIGITS Phonxx MIN (AREA CODE & TEL#)
05 08 ONLY St CLASS STATION CLASS MARK
06 333 OR 334 PAging Ch INITIAL PAGING CHANNEL
07 2 DIGITS O-LOAd CLASS ACCESS OVERLOAD CLASS
08 A OR B PrEF SyS PREFERRED SYSTEM (SND TOGGLES)
09 2 DIGITS grOUP Id GROUP ID (10 IN USA)
10 5 DIGITS SECUrity SECURITY CODE
11 MM/DD/YY 1 dAtE CAN NOT BE CHANGED
12 MM/DD/YY 2 dAtE INSTALLATION DATE
13 Prog done PRESS SEL CLR TO EXIT,
ON CT 302 YOU MUST TURN
POWER OFF & ON.